Rongzhi Electric Power is a large-scale Active Load Balancer ALB manufacturer and supplier in China. We have been specialized in High voltage equipment for many years. Our products have a good price advantage and cover most of the South America, Middle East, Africa, Southeast Asia markets. We look forward to becoming your long-term partner in China.
Active power filter (APF: Active power filter (Active power filter) is a new type of power electronic device used for dynamic suppression of harmonics and compensation of reactive power. It can quickly track and compensate harmonics of different sizes and frequencies. The reason why it is called active is that compared with passive LC filter, it can only passively absorb harmonics of fixed frequency and size. APF can control and actively output the size, frequency and phase of current by sampling load current and separating each harmonic and reactive power, and quickly respond to offset the corresponding current in the load, realizing dynamic tracking compensation, and can complement both harmonic and reactive power and unbalance.
Size | 400V |
50A-450A | |
Rated input line voltage | 380V(-40%~+20%) |
Power frequency | 50/60Hz(Range45Hz~62Hz) |
Number of Parallelable | unlimited |
overall efficiency | ≥97% |
Power network structure | Three phase three wire four phase four wire |
Current transformer | 150/5~10000/5 |
circuit topology | Three level |
performance index | |
harmonic compensation | support |
reactive compensation | support |
unbalance compensation | support |
harmonic range | >97% |
fast response time | <100us |
total reponse time | <10ms |
Target power factor | Capacitive sensibility is continuously adjustable |
Switch frequency | 10kHz |
Cooling Type | Intelligent air cooling |
noise label | <65dB |
communication interface | RS485,CAN, network interface |
communication agreement | General electric protocol. Modbus protocol |
Module dis la interface |
LCD multi-function touch color screen |
Protection function | Protection of overvoltage .short circuit, inverter reverse and over compensation |
Fault Alarm | Yes |
Environmental requirement | |
Altitude | ≤ 1500mm,Beween 1500 and 4000m, according to GB/T3859-2, every 100m increase, the power is reduced by 1% |
Operating temperaturel | -10℃~+40℃ |
Relative humidity | 5%~95%,without condensation |
Protection Grade | Other IP levels can be customized |
1.SPA3 is suitable for industrial load situations
3.SPA4 series active power filter
1. Effectively eliminate neutral current caused by zero sequence harmonics
2. It can filter all or selected harmonics in the range of 2 ~ 25 times at the same time
3. Single-phase dynamic compensation, not affected by system imbalance
4. Parallel installation mode, simple installation, convenient, easy to expand, up to 4 parallel
5. Simple design and selection, no need to carry out detailed analysis of the power grid, only need to measure the size of harmonic current
6. Light volume, wall-hanging installation
7. Standard communication interface, convenient access to the user's existing communication system